MFIII-945G/GC
Industrial designed
Mini Desk Top PC
Engineering Specification
( LGA 775 CPU supported )

Motherboard specification:
All in one designed with VGA , LAN , sound on board.
Industrial circuit and components designed.
Chip sets: Intel 945G/GC + ICH7
CPU: Intel Celeron or Pentium 4 , Core 2 Duo socket LGA 775 CPU ( Conroe , Conroe-L , CEDAR MILL , Prescott CPU supported )
Lan : 1 x 10/100/1000 Giga Lan on board
USB ports: standard 8 ports ( 2 in the front & 6 in the back by slot bracket )
DVI interface : DVI interface ( optional )
Watch dog timer supported.
COM ports : 6 COM ports ( 2 COM ports standard , extra 4 COM ports optional by slot bracket ) ( +5 V/+12V selectable power supported on each port , COM 2 can be configured for RS422/485 )
Case size : 32 cm ( W ) x 33 cm ( L ) x 11 cm ( H ) for MFIII-945G/GC
Power supply : ATX 300 watts switching power supply 110/230 V switchable.
Driver bay: 1 x 3.5ˇ¨ HDD + 1 x 3.5ˇ¨ FDD or HDD + 1 x 5.25ˇ¨ CD-ROM
Riser card for MFIII-945G/GC : 4 x PCI slots ( standard ) or
1 x PCI-E ( x16 ) + 2 x PCI slots

Motherboaqrd Engineering Specification:
Product Name MF-945G/GC
Form Factor Customer Design
CPU type supported Intel Celeron or Pentium 4 , Core 2 Duo socket LGA 775 CPU ( Conroe , Conroe-L , CEDAR MILL , Prescott CPU supported )
System Speed Up to 3.8GHz+
CPU Operating Frequency 533 / 800/1066 MHz
Green /APM APM1.2
CPU Socket Socket LGA 775
Chipset
Intel 945G/GC Chipset
MCH: 82945G FC-BGA + ICH7 mBGA
FWH
BIOS Award BIOS Support ACPI Function
Cache 128K/256K/512K/1M/2M Level 2 (CPU integrated)
VGA 945G chipset built-in ,Supports CRT interface
Shared memory, max. 224MB
DVI interface ( optional ) Chrontel CH7307 for DVI
LAN Realtek RTL8111C PCI-E Giga LAN controller (10/100/1000Mb)
Audio ICH7 Built-in Sound controller + AC97 Codec ALC655 (Line-out, Line-in, MIC.)
Audio AMP ( optional ) 2 watts per channel
Memory type
2 x DDR2 PC 533/667 DDR2 SDRAM( without ECC Function) DIMM Module, Max. capacity - 4GB
LPC I/O Winbond W83627DHF: IrDAx1 Parallel x1, COM1(RS-232),COM2(RS232/RS422/RS485), FDC 2.88MB/1.44MB,Hardware monitor(3 thermal inputs,6 voltage monitor inputs , VID0-4 , 1 chassis open detection ,3 Fan Header)
Jumper selectable for +5V or + 12V at pin 9 of DB9 for COM 1 , 2
Secondary I/O (option) Fintek F81216; for COM3,4,5,6 (RS232) 6 x10 pins header ( 2 sets ) for extra 4 COM ports
Jumper selectable for +5V or + 12V at pin 9 of DB9 for COM 3, 4,5,6
RTC/CMOS ICH7 Built-in
Battery Lithium Battery
PS2 Keyboard/Mouse Controller Winbond W83627DHF Built-in
EPP/ECP Yes
Local bus IDE ICH7 built-in ,IDE1,IDE2 (Ultra DMA 33/66/100 )
Board Size Customer size
Power Connector ATX P4 type
Expansion slots ( Riser card ) 4 x PCI slots or 1 x PCI-E ( x16 ) + 2 x PCI slots selectable
USB 2.0 x 8 ports (Universal Serial Bus) Standard 8 ports ,USB Version 2.0, 2 ports in the front and 6 ports in the back side by slot bracket.
SATA 4 ports 4 ports serial ATA ports for HDD /CD-ROM interface
IrDA (Infrared Ray) pin header ,This allows infrared wireless communication.
Watchdog Timer ( optional ) Yes ( 256 segments : 0,1,2,...255 sec/min)
System Voltages +5V,+12V,-12V,5VSB,+3.3V
Other Features Modem Wakeup, LAN Wakeup ,
Operating Temperature 0˘XC~60˘XC (32˘XF~140˘XF)
Storage Temperature -20˘XC~80˘XC (-68˘XF~176˘XF)
Relative Humidity 10%~90% (non-condensing )
MTBF 70000 hours